Case study · London commercial office

Large commercial office acoustic installation.

A multi-area acoustic package combining suspended ceiling systems, wall panels, setting-out, structural supports and coordination around live fit-out services.

Completed commercial office meeting room with an acoustic ceiling grid and wall finishes

Commercial workplaceLondonWalls & ceilingsCoordinated installation

Project overview

A coordinated package across multiple work areas.

The installation required accurate wall and ceiling setting-out while the wider fit-out continued around the acoustic programme.

I&O reviewed the coordinated drawings, established working datums and progressed the support and visible installation in planned zones. Ceiling work included suspension points, service coordination and module alignment. Wall work required clean junctions around finished interfaces, trims and room equipment.

The project was delivered by specialist teams working through changing access, deliveries and neighbouring trades while maintaining clear progress records and quality checks.

Project type

Large commercial workplace fit-out with multiple acoustic areas.

I&O scope

Survey, setting-out, supports, wall panels, suspended ceiling elements, alignment and snagging.

Key challenge

Maintaining the coordinated acoustic layout around dense services and active fit-out interfaces.

Support work

Approved structural anchors, suspension drops, unistrut bridges and threaded rod where required.

Visible finish

Consistent levels, panel joints, trims, corners, cut-outs and coordinated room lines.

Delivery

Sequenced commercial-site installation with supervised teams and progressive close-out.

Acoustic ceiling supports installed around commercial building services — Hidden support coordination

Completed acoustic wall panels in a London commercial office — Completed acoustic walls

Finished meeting room combining acoustic wall and ceiling systems — Coordinated room finish

Delivery result

Complex installation made visually simple.

01
Set-out protected
Room and ceiling datums were maintained across active work zones.
02
Services coordinated
Suspension and supports were planned around lighting, sprinklers, ventilation and containment.
03
Finishes aligned
Wall and ceiling elements were checked against the architectural layout and adjacent finishes.
04
Areas closed out
Progressive quality checks supported snagging and handover across the completed package.

Similar project

Planning a commercial acoustic package?

Review our commercial acoustic installation service, then send the drawings, specification, programme and site location.

Discuss your project