Suspended acoustic systems

Acoustic baffles, rafts & fins installation.

Setting-out, structural fixing, support systems, assembly, lifting, suspension and final alignment for commercial feature ceilings across London and the UK.

Suspended acoustic ceiling modules installed in an open commercial office

BafflesRaftsFinsFeature grids

Above-ceiling coordination

Visible geometry supported by controlled fixing.

Suspended acoustic systems depend on accurate setting-out below and practical coordination above.

We install linear baffles, fins, rafts, beams, feature grids and modular acoustic ceilings for commercial fit-out projects. The work can include survey, setting-out, drilling to the approved structure, suspension wire or threaded rod, unistrut support and bridges, module assembly, lifting, levelling and final line checks.

Dense service zones are common. We coordinate around lighting, sprinklers, ventilation, containment and other services, and use only the project-approved fixing and support detail where direct suspension is obstructed.

Linear baffles

Individual or grouped baffles set out to centres, suspended and aligned across the finished ceiling zone.

Acoustic rafts

Pre-made or site-assembled rafts positioned and levelled to coordinated reflected ceiling information.

Fins & beams

Vertical fins and beam systems assembled with consistent spacing, orientation and height.

Feature grids & cassettes

Modular ceiling structures assembled in a controlled sequence and coordinated around services.

Unistrut & threaded rod

Support bridges and rod systems installed where required by the approved coordinated design.

Wire suspension systems

Specified wire drops, toggles, eyes, hooks and suspension components installed and adjusted to level.

Acoustic ceiling suspension points installed around dense commercial building services — Service and fixing coordination

Acoustic ceiling modules assembled at floor level before lifting — Floor-level module assembly

Completed acoustic ceiling grid aligned with lighting in a commercial meeting room — Finished ceiling alignment

Installation sequence

Structure to finished line.

01
Set out
Transfer grid, centres, levels and coordinated service positions from approved project information.
02
Fix supports
Drill and install the specified structural anchors, suspension points, rod or unistrut support.
03
Assemble & lift
Build components in practical sections, protect finishes and lift in the planned sequence.
04
Level & finish
Adjust drops, check spacing and alignment, complete interfaces and close snagging items.

Project examples

Recent suspended acoustic work.

See how the same delivery principles apply to different ceiling geometries and service conditions.

Review our suspended acoustic baffles case study , Autex commercial ceiling case study or wider commercial acoustic capability .

Ceiling package

Need baffle, raft or fin installers?

Send the reflected ceiling plans, sections, fixing details, product schedule, quantities, programme and access information.

Send us your drawings